|
|
|
|
|
DEPRO RUST PHOSPHATANT |
|
Anti-rust phosphate primer |
|
| Initial primer for protection of metal against corrosion, intended for the protection of almost all metals, and in particular the difficult bases such as light alloys, aluminium, galvanised...with the exception of non-magnetic stainless steel. | |
| ADVANTAGES | |
| Ready for use. Can be covered with other paint finishes after one hour. Check their compatibility. Can be covered with epoxy resins. Excellent adhesion. | |
Good resistance to:
|
|
| CHARACTERISTICS | |
| Coverage rate: 10/12 square metres per litre 15/20 microns per coat | |
| Density: 950kg/cubic metre | |
| Drying: Touch dry 10 minutes, dry 1 hour, stoving 10 minutes at 120 degrees C | |
| Colour: Matt grey | |
| USES | |
| Depro Rust Phosphatant is a primer paint intended for the anti-corrosion protection before painting metals when good adhesion is required. | |
| STOCK | |
| Supplied in 5 litre cans. Stores well in original container which is kept closed. Do not expose to frost. | |
| METHOD OF APPLICATION | |
| For Depro Rust Phosphatant to give the best results the surface must be properly prepared, dry, free from rust, grease, calamine etc | |
| -Preparation of the surface | |
| The metal should be sand blasted. Alternatively it should be thoroughly de-greased and wire brushed to remove the majority of the rust. | |
| -Preparation of the product | |
| Depro Rust Phosphatant must be diluted before use with Diluant Rust Phosphatant | |
| -Application | |
| Dilute the Depro Rust Phosphantant with 15% Diluant Rust Phosphatant. Depro Rust Phosphatant an be applied as a single coat or with multiple coats - it is not essential that it is covered by another paint. Depro Rust Phosphatant is a base primer. It should only be applied in thin layers. | |
| Cleaning of brushes should be done using Diluant Rust Phosphatant | |
